FIBROTECH CONSTRUCTION

PREPARATION OF INVESTMENT

TECHNOLOGICAL AND IMPLEMENTING SUPERVISION

FIBROSLAB HOME FOUNDATION PLATES

CONSTRUCTION IN THE IZODOM SYSTEM

TRAINING ACTIVITY

PREPARATION OF INVESTMENT

At the request of our clients, we participate in the preparation of the construction site and contract the necessary materials and construction equipment. Our cost estimators and site managers take care of the timely implementation of the construction project, placing special emphasis on compliance with the adopted budget and quality control of the services and materials provided.

Thanks to cooperation with the largest producers and building warehouse networks, we are able to provide attractive conditions for the purchase and delivery of building materials.

We provide services related to contracting specialized companies from the engineering construction segment, performing tasks such as reinforced concrete piles, reinforced concrete wells, land stabilization and slopes, drainage of excavations, controlled drilling, cutting in reinforced concrete or repair of reinforced concrete constructions.

We strive to ensure that the construction process goes smoothly, preparing substitute contracts in the event of the exclusion of a previously selected contractor or supplier of building materials and services.

Our technical solutions and engineering facilities allow you to quickly solve problems occurring during construction works.

Thanks to our experience, we have protected many implementations against unjustified costs, both basic and additional, ensuring the comfort of construction works, caring for the construction manager and the investor.

TECHNICAL AND IMPLEMENTING SUPERVISION

In spite of educating construction companies in the scope of delivered construction technologies, many contractors need technical support directly on the construction site and in the interpretation of the delivered project. To enable the smooth implementation of the task, our managers and technologists are in constant contact with the foreman of the implementation group.

We provide consultations directly at the construction site, together with the construction supervision inspector and the construction manager taking part in the collection of the elements.

Due to the fact that few general construction companies and concrete factories have knowledge in the field of using fiber as the basic reinforcement of structural elements, we supervise the process of preparing concrete mix and its delivery to the construction site.

We solve problems occurring during the application of fibrobeton, instructing pump operators on how to deal with the resulting difficulties. We have in this area a wide range of solutions resulting from our experience and construction practice.

We suggest what methods of assembly of composite reinforcement to choose, bearing in mind the tendency of reinforcement to move during concreting. We share our experience regarding the fixing of composite reinforcing bars to the substrate in order to ensure that they are kept in the right place.

FibroSlab FOUNDATION PLATES

The FibroSlab Home foundation boards are the flagship product of our company. We have been continuously refining our technology since 2011 in cooperation with many designers of building structures, Polytechnics and concrete laboratories, ie Berg and Lafarge.

The foundation slab is an alternative to traditional foundations made on benches and foundation walls. The use of a significant amount of reinforcing steel meant that they were significantly more expensive than traditional solutions. The use of fibrobeton resulted in a reduction in the price of the foundation slab and a reduction in the time needed to carry it out. In many cases, it also influenced the improvement of the construction quality of this building element.

The solution we offer gains more and more popularity on the Polish and foreign markets due to the low price and simplicity of implementation even for inexperienced construction crew. This makes it a solution that can be implemented by an economic system.

This technology has been tested on over 200 construction sites implemented since the beginning of the project’s existence.

The FibroTech Engineering project team has developed many models of boards for different types of building structures. Particularly popular models are:

– FibroSlab Core – a board adapted to skeletal construction. The thermal insulation has been transferred over the foundation slab and connects to the thermal insulation in the wall core. It is a foundation model that can be implemented even in one day with adequate ground conditions.
– FibroSlab Standard – this is a model of a foundation slab insulated from underneath with styrodur boards (XPS) with a capacity from 300 to 500 kPa. The thickness of the panels is usually 10 cm. A floor heating installation or plumbing and electrical installation is installed on the panel and finished with a floor layer.
– FibroSlab Izodom – a combination of two solutions – prefabricated styrofoam and fibrobetone fittings – in order to obtain the best parameter of the thermal insulation of the slab and the lowest possible price of the foundation. The underfloor heating can be installed in the core of the board. The use of Agilia self-consolidating concrete allows for a very even substrate, on which finishing layers can be made.

To complete the offer and design of the foundation slab, you need:
– geotechnical investigation (geoengineering opinion),
– Land Development Plan (PZT) or other document on the basis of which land levels can be determined on a building plot,
– projections and cross-sections of the building together with the installation project.

The FibroTech and Lafarge commercial team will present an offer for the completion of construction works within 3 days. After accepting it within 2 weeks, a substitute design of the foundation slab and preparations for starting construction works will be carried out.

We have particularly attractive cooperation conditions for companies involved in the production and erection of prefabricated and prefabricated buildings. We are able to conclude long-term contracts guaranteeing timely service and the highest quality of construction works. Permanent commercial conditions will enable the submission of a comprehensive offer to customers wishing to purchase a house and its assembly at a single supplier.

CONSTRUCTION IN THE IZODOM SYSTEM

The foundation slabs of our study are an ideal base for erecting energy-saving and passive buildings thanks to the use of the highest quality insulation materials. These include the extruded polystyrene XPS and Izodom 2000 Polska insulating fittings.

What is XPS?

XPS – extruded polystyrene – is an insulating material produced in the process of expanding polystyrene. It is a homogeneous material with a smooth surface and structure. The nature of connections between cells results in significant mechanical strength and increased heat resistance parameters. The closed cells, from which the boards are made, make it harder and less absorbable than traditional EPS.

In our designs, we most often use XPS boards with a compressive strength of over 300 kPa and a corresponding deformation module due to long-term pressure (“creep” effect). The use of EPS polystyrene can lead to excessive deflection of the foundation slab and cracking. This is particularly dangerous in places where there are increased penetration forces, for example through poles.

Long cooperation with suppliers of this product made it possible to conclude a contract for its receipt on preferential terms and transfer this price to our client.

What is the Izodom 2000 Polska system?

Styrofoam elements from Izodom 2000 Polska are prefabricated styrofoam elements assembled similarly to blocks, and then they are filled with concrete or fibrobeton.

The system consists of:
– insulation of a foundation slab made of fittings with a base thickness of 15 and 25 centimeters EPS and a reinforced concrete slab 25 centimeters thick,
– wall elements with a total insulation thickness of 10 to 30 centimeters and a standard core thickness from 15 to 20 centimeters, which can be used for erecting foundation and standard walls.
– prefabricated ceiling elements overburdened with reinforced concrete reinforced with steel mesh, composite rods or fibrobeton with the addition of steel or polymer fibers.
– prefabricated roof elements laid on roof truss or girders, which are covered with tinsmith and finishing facings (tile, roofing tile, etc.)
The advantage of this system over conventional brick systems is:
– the possibility of obtaining the best available thermal insulation parameters of the building available on the Polish market (energy-efficient, passive and zero-energy construction),
– decisively shortening the time of building completion,
– high quality of the obtained ferroconcrete structure,
– the possibility of building many elements of the building using the economic method, also thanks to the use of fibrobeton,
– a significant reduction in the cost of building use,
– less involvement of employees on the part of the contractor,
– the possibility of building the foundations of the building in the “white bathtub” system using the technology of fiber concrete and composite reinforcing bars.

Thanks to the design, commercial and executive cooperation with Izodom 2000 Polska, we are able to comprehensively service the customer by delivering the system together with the construction of the object.

CONCRETE SUPPLY

Concrete is the most commonly used construction material. The vast majority of technological solutions developed by us and numerous relationships built with its suppliers are concentrated around it.

What is concrete?

It is a mix of cement in the form of cement, filler, which are aggregates, and admixtures, thanks to which it obtains the desired properties. The solvent for cement is water, the exact amount of which is the basis of each recipe. Once dissolved, the cement fills the space between the filler grains, which in turn results in the desired compressive strength and abrasion resistance.

The combination of concrete and fiber causes a change in the name of the resulting composite to fibrobeton.

The connection of concrete with steel reinforcing bars results in a change of name to reinforced concrete. It is correct to call reinforced concrete with steel fiber in structural elements.
Thanks to many years of practice, we know how to design an ideal mixture to perform the task entrusted to us. We can develop a composite recipe for an individual order, taking into account the Investor’s special request or the circumstances of its use. We are one of the few experts on the European market that has experience in the technology of fibrobeton and its use.

Our technologists took part in the design of concrete:
– waterproof in the “White Baths” system using the most modern super-plasticizers and polymer fibers,
– slowly ripening to minimize shrinkage and structural cracking,
– specialist, ie self-compacting Agilia with the addition of construction and anti-shrinkage fiber,
– resistant to chemically aggressive environments.

We have advised producers, designers, contractors and investors on:
– use of fine aggregate for construction with very high rebar density,
– selection of a mixture of aggregates and super plasticizers to obtain concretes resistant to the action of nitric acids for the Rokita production plant in Brzeg Dolny,
– development of a concrete mix with the addition of polymer fiber and an appropriate type of cement for the foundation of the Perlowa Dolina residential building in Bydgoszcz,
– resistant to the impact of sea water on port marinas.

One of our strategic partners in the delivery of concrete is Lafarge Polska, with the exception of the Lower Silesian market, where we build cooperation with Abet, which in our opinion has the best preparation for the tasks entrusted to them, mainly in the fiber-reinforced concrete technology with significant use of steel fiber. quantities.

Sales representatives and operators of Lafarge nodes are fully trained in the field of cooperation with our engineering and sales department, which has led to an increase in our commercial scope and shorten the time of individual customer service.  Here are the photos from the trainings?
We will give you comprehensive explanations regarding this product with pleasure and great commitment.
We invite you to cooperation!

CONCRETE SUPPLY

Concrete is the most commonly used construction material. The vast majority of technological solutions developed by us and numerous relationships built with its suppliers are concentrated around it.

What is concrete?

It is a mix of cement in the form of cement, filler, which are aggregates, and admixtures, thanks to which it obtains the desired properties. The solvent for cement is water, the exact amount of which is the basis of each recipe. Once dissolved, the cement fills the space between the filler grains, which in turn results in the desired compressive strength and abrasion resistance.

The combination of concrete and fiber causes a change in the name of the resulting composite to fibrobeton.

The connection of concrete with steel reinforcing bars results in a change of name to reinforced concrete. It is correct to call reinforced concrete with steel fiber in structural elements.
Thanks to many years of practice, we know how to design an ideal mixture to perform the task entrusted to us. We can develop a composite recipe for an individual order, taking into account the Investor’s special request or the circumstances of its use. We are one of the few experts on the European market that has experience in the technology of fibrobeton and its use.

Our technologists took part in the design of concrete:
– waterproof in the “White Baths” system using the most modern super-plasticizers and polymer fibers,
– slowly ripening to minimize shrinkage and structural cracking,
– specialist, ie self-compacting Agilia with the addition of construction and anti-shrinkage fiber,
– resistant to chemically aggressive environments.

We have advised producers, designers, contractors and investors on:
– use of fine aggregate for construction with very high rebar density,
– selection of a mixture of aggregates and super plasticizers to obtain concretes resistant to the action of nitric acids for the Rokita production plant in Brzeg Dolny,
– development of a concrete mix with the addition of polymer fiber and an appropriate type of cement for the foundation of the Perlowa Dolina residential building in Bydgoszcz,
– resistant to the impact of sea water on port marinas.

One of our strategic partners in the delivery of concrete is Lafarge Polska, with the exception of the Lower Silesian market, where we build cooperation with Abet, which in our opinion has the best preparation for the tasks entrusted to them, mainly in the fiber-reinforced concrete technology with significant use of steel fiber. quantities.

Sales representatives and operators of Lafarge nodes are fully trained in the field of cooperation with our engineering and sales department, which has led to an increase in our commercial scope and shorten the time of individual customer service.  Here are the photos from the trainings?
We will give you comprehensive explanations regarding this product with pleasure and great commitment.
We invite you to cooperation!

Contact

2 + 1 =

* I consent to the processing of my personal data for marketing purposes. I know that I have the right to access, rectify, delete data and limit their processing.

FibroTech Engineering sp. z o.o.

ul. Racławicka 15/19 53-149 Wrocław

+48 71 727 76 23

biuro@fibrotech.pl

U

NIP: 8992842372 REGON: 369672587, KRS: 0000722839